XSG Series Chemical use Rotary Spin Flash Dryer for wet paste
Descriptions
XSG Series Chemical use Rotary Spin Flash Dryer for wet paste is designed by ourselves .The hot air enter into the dryer chamber from the bottom of dryer host,its going into the dryer chamber by inlet entrance.The rotor at the conical base of the drying chamber fluidity product particles in a drying-efficient hot air flow pattern in which any wet lumps are rapidly disintegrated. Using the heat from the air stream, the material dries as it is conveyed. Product is separated using cyclones, and/or bag filters. Typically, cyclones are followed by scrubbers or bag filters for final cleaning of the exhaust gases to meet current emission requirements.
Airborne, fine particles pass through a classifier at the top of the drying chamber, while larger particles remain in the air flow for further drying and powdering.
Principle of work
Hot air, from the bottom of drier, enters drying chamber with stirring and crushing device at a suitable atomizing speed. It exerts strong shearing, blowing, floating and rotating effect to raw material. Therefore raw material is granulated through centrifuge, shearing, impacting and friction effect. It strengths the process of heat exchange. At the bottom of drier, the large and damp granules are crushed under the action of stirrer. While, granules that are small in particle and containing less moisture will be lifted accompanied with revolving air stream. During that period, it is dried further. Because the two phases gas and solid of flows in rotating, the inertia of solid phase is more than that of gas and the relative velocity between solid and gas phases is large, it strengthens the process of heat exchange. Therefore, the equipment has big drying capacity.
Features
1. Special machine design according to the product.
2. Uniform drying due to movement of product.
3. Effective use of Drying Air circulation fans.
4. Heat recovery system can be added to the dryer in accordance with customer demand.
5. Multi stage belt systems can be used.
6. Can easily be controlled belt speed and drying time.
7. Less workers make same work according to tray drying system
8. Dryer can be use at continuous systems.
9. Can be use most of sectors.
Technical parameters
| Model | XSG-2 | XSG-4 | XSG-6 | XSG-8 | XSG-10 | XSG-12 | XSG-16 | XSG-20 |
| ID of main machine(mm) | 200 | 400 | 600 | 800 | 1000 | 1200 | 1600 | 2000 |
| Air amount(m3/h) | 350-500 | 1150-2000 | 2450-4500 | 4450-7550 | 7000-12500 | 10000-18000 | 18000-30500 | 50000-78000 |
| Evaporated moisture(kg/h) | 12-17 | 40-70 | 80-150 | 150-250 | 230-420 | 300-600 | 600-1000 | 1000-1500 |
| Max equipped power (kw) | 10 | 20 | 40 | 65 | 85 | 105 | 150 | 230 |
| Max height(m) | 4.0 | 4.8 | 5.8 | 6.4 | 7.1 | 7.8 | 8.5 | 10.1 |
| Occupied area(m2) | 15 | 20 | 28 | 35 | 40 | 52 | 80 | 150 |
Dimension
| Type | Height | Length | Width |
| XSG-4 | 4600 | 5500 | 5000 |
| XSG-6 | 5500 | 6550 | 6000 |
| XSG-8 | 6000 | 7100 | 5600 |
| XSG-10 | 7100 | 8200 | 6700 |
| XSG-12 | 7500 | 8900 | 7000 |
| XSG-14 | 7800 | 10500 | 8500 |
| XSG-16 | 8500 | 14500 | 11000 |
Note: all details above for reference only. Because of material features, the parameters vary. we have the right to change but not notice, pardon!
Product Tags:
|
|
Rotary Spin Flash 70 Kg/H Industrial Drying Equipment Images
|
